Operating System: No LSB modules are available.
Distributor ID:	Ubuntu
Description:	Ubuntu 15.04
Release:	15.04
Codename:	vivid

Kernel Version: 
Linux messrechner1 4.1.3-rt3 #2 SMP PREEMPT RT Tue Aug 11 06:59:47 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

Realtime (cat /sys/kernel/realtime, is 1 at realtime kernels, 0 else): 1

Computer: # dmidecode 2.12
SMBIOS 2.6 present.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
	Manufacturer: FUJITSU                         
	Product Name: D2924-A1
	Version: S26361-D2924-A1
	Serial Number: B0C97A44
	Asset Tag: Not Specified
	Features:
		Board is a hosting board
		Board is replaceable
	Location In Chassis: Not Specified
	Chassis Handle: 0x0003
	Type: Motherboard
	Contained Object Handles: 0

  -march=                     		westmere
	Product Name: ESPRIMO E9900                 
	Product Name: D2924-A1

CPUs: model name	: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz
model name	: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz

Bios version: 6.00 R1.21.2924.A1              

Bios date: 04/06/2011

------------------------------------------------------------------------
Status of device /dev/ttyS0 before configuration:

/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal skip_test low_latency


speed 19200 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R;
werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
-isig -icanon iexten -echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke

------------------------------------------------------------------------
Status of device /dev/ttyS1 before configuration:

/dev/ttyS1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3
	Baud_base: 115200, close_delay: 50, divisor: 0
	closing_wait: 3000
	Flags: spd_normal skip_test low_latency


speed 19200 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R;
werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
-isig -icanon -iexten -echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke

/dev/parport0 opened with file descriptor 3.
The data pins of the parallelport /dev/parport0 are now configured as inputs.

actual time:       Local time: Tue 2015-12-22 08:06:10 UTC
  Universal time: Tue 2015-12-22 08:06:10 UTC
        RTC time: Tue 2015-12-22 08:06:10
       Time zone: Etc/UTC (UTC, +0000)
     NTP enabled: yes
NTP synchronized: no
 RTC in local TZ: no
      DST active: n/a

Info: Failed to set signal handler for signal 32 : Invalid argument
Info: Failed to set signal handler for signal 33 : Invalid argument
# /dev/cpu_dma_latency set to 0us
Serial read thread (id 0, device /dev/ttyS0): Baudrate 19200, 8 bits/byte, 1 stop bit(s), 1 parity bit(s)
Serial read thread (id 1, device /dev/ttyS1): Baudrate 19200, 8 bits/byte, 1 stop bit(s), 1 parity bit(s)
main(): First parallel data are read unfragmented (act. index 4774, thread number 3).
main(): First serial data from ring buffer for thread nr. 0 are read (act. index 4).
main(): First serial data from ring buffer for thread nr. 1 are read (act. index 4).

actual date: Tue Dec 22 08:07:23 UTC 2015